Friday, September 7, 2007

CRAGER WHEELS CLASSIC....

As a very fond of crager wheels I have some informations for everyone. How do i care for my cragar wheels so that it will always keep good looking, i used soap and clean water to clean it and once a month I use a no abrasive car wax on them.

Since all cragar wheels are a lug centric i used to balance a unilug through out the lug nut holes. Remember Crager S/S do not fit to a 6-lug truck as it would have a 6 spokes. S/S is only made in rear wheels drive remember that.

People sometimes ask how do i measure the bolt pattern of cragar wheels, and my tips is on a five lug pattern you measure from the center of one stud, skip a stud and to the far side of the third stud.. Got it? it so easy...

I have also an idea of backspacing which is usually ask by the customer who are fond loving also of cragar wheels. Backspacing is the distance from the mounting surface of the wheels, which contacts the hub, to the back rim flange.
crage
Crager louvers now still marketed by a company and you can still check cragar wheels to a wheels and tires warehouse.Check out in the warehouse near you and online.




No comments: